If you hit fine up close but repeatedly overshoot the moment you pull up a 4x, it is worth checking that scope's sensitivity. PUBG lets you set sensitivity per scope. This guide measures the actual turn distance for each scope, uses it for calibration, and covers vertical sensitivity too.
Why each scope feels different
Scoping in narrows the field of view, so the same angular turn looks larger on screen. PUBG also applies per-scope settings and internal sensitivity behavior, which means the numbers alone do not describe how two scopes will feel. If one value works for you, it can stay; calibrate a scope separately only when it repeatedly overshoots or undershoots.
PUBG scope sensitivity calibrator
Enter your target cm/360 plus the current sensitivity and measured cm/360 for each scope. The tool returns a first correction. Apply it, measure again under the same conditions, and repeat until you are close to the target.
Scope-by-scope measured calibration
Use measured cm/360 at each zoom level for a first-pass correction.
Vertical sensitivity is recoil control
Vertical sensitivity sets how fast your aim moves up and down. Because PUBG recoil mostly climbs, sensitivity that is too high makes your muzzle dive as you pull down. Too low and you cannot pull far enough, so shots spray upward.
| Setting | Direction | Why |
|---|---|---|
| Vertical = horizontal | Default, safest | Up-down matches left-right, so it stays predictable |
| Vertical < horizontal (about 0.8–1.0×) | Recoil-control focused | Keeps the muzzle from dropping too far when you pull down |
| Vertical > horizontal | Not recommended | Aim tends to snap downward during recoil control |
How to confirm it is right
- 1Aim at the same target through each scope in the range — Alternate red dot, 4x and 8x on a target at the same distance.
- 2Watch whether you overshoot or undershoot — Repeatedly sailing past means that scope is too fast; needing two corrections means too slow.
- 3Change one scope at a time — Adjust several at once and you cannot tell what fixed it.
- 4Check vertical with a spray — Empty a magazine into a wall and see whether the pattern climbs or dives.
Do not judge by feel — use clips
Scope sensitivity shows itself in a split second mid-fight. Whether your aim overshot in the one second after you raised a 4x is not something memory keeps. Recording the screen while you tune settings is far more reliable.
DOR detects PUBG automatically and keeps engagements and kills as separate clips. You can replay the exact aim movement from the moment you scoped in, frame by frame, and judge with your eyes whether scope sensitivity was too much or too little. No setup, just leave your game running — and it is free.
Wrapping up
Scopes feeling different is normal. To match a chosen reference, measure each scope's cm/360, calculate a first correction, and then measure again. Treat vertical sensitivity the same way: do not assume one ratio is universally correct; adjust it from your spray pattern. The fastest final check is the range and real engagement clips.
