← Blog

Delta Force PC System Requirements, Minimum, Recommended, and Enough Headroom to Record

In-game combat screenshot from Delta Force
Image source: © Team Jade / TiMi Studio Group · Delta Force official Steam media
Key takeaways
  • Per the official Steam listing, the minimum spec is a GTX 660 with 8 GB RAM, the recommended spec is a GTX 1060 5G with 16 GB RAM, and both tiers need 88 GB of storage.
  • A four-step dxdiag walkthrough shows how to check your CPU, RAM, GPU, and free disk space in about five minutes.
  • To play and record at the same time, use the recommended tier plus a hardware encoder such as NVENC as your yardstick.

Before installing Delta Force, the first thing to check is where your PC actually stands.

This guide copies the official system requirements straight from the Steam store page into one table, then goes a step further: instead of asking whether the game merely launches, it helps you judge whether your machine has enough headroom to play and record highlights at the same time.

Storage is treated the same way — not just the 88 GB install size, but the extra room your clips will need.

The real question: can you play and record?

Treat the minimum spec (GTX 660, 8 GB RAM) as a baseline for launching the game on low settings. If you want stable frame rates in large-scale fights, the recommended spec (GTX 1060 5G, 16 GB RAM) is the practical starting line.

If you also plan to record, check whether your GPU has a hardware encoder such as NVENC and whether you sit comfortably above the recommended tier. Hardware encoding takes most of the load off the CPU, so a recommended-spec PC can usually handle recording without an upgrade. For how to tune the graphics options themselves, see the Delta Force best settings guide.

Official Delta Force system requirements (Steam)

ItemMinimumRecommended
OSWindows 10 64-bitWindows 10 64-bit
CPUIntel Core i3-4150 / AMD FX-6300Intel Core i5-6500 / AMD Ryzen 5 1500X
Memory8 GB RAM16 GB RAM
GPUGeForce GTX 660 / Radeon HD 7870 / Intel Arc A380GeForce GTX 1060 5G / Radeon RX 5500 XT / Intel Arc A580
DirectXVersion 12Version 12
Storage88 GB available space88 GB available space

How many GB is Delta Force on PC? Storage to free up before you install

Short answer: the base game needs 88 GB of available space on Steam (checked October 14, 2026). The minimum and recommended tiers list the same 88 GB, so your disk needs the same room no matter how strong your graphics card is. That figure covers the base game only.

The Black Hawk Down campaign is listed on Steam as a separate free DLC with its own storage line, so installing both takes more. The table breaks it down.

ItemSpace neededNotes
Delta Force base game (Steam)88 GB available spaceSame for minimum and recommended
Black Hawk Down campaign (free Steam DLC)28 GB available spaceInstalled separately; higher minimum spec (GTX 1060 5G, 16 GB RAM)
Base game + campaign togetherAbout 116 GB88 GB plus 28 GB
Future updates and patchesNo official figureEach season update differs in size, so keep spare room

Download size is not the same as installed size

Steam downloads compressed data, so the number in the download window can come out smaller than 88 GB. Once installed, the game takes more space on disk, and while a patch is applied its temporary files briefly need room too.

That is why the safer yardstick is not how big the download is, but whether the target drive still has more than 88 GB free. Steam's official listing does not make an SSD mandatory, but given the load times on large maps, installing on an SSD is the more comfortable choice when you can. If you also save recordings to the same drive, see how to reduce game recording file size.

  1. 1Check free space on the install driveOpen Settings > System > Storage to see free space per drive. Make sure you have 88 GB for the base game, or 116 GB or more if you add the campaign.
  2. 2Check the real install size in SteamAfter installing, right-click Delta Force in your Steam library and go to Properties > Installed Files to see the current size. The same screen lets you move the install folder to another drive.
  3. 3Clean up first if you are shortDelete temporary files from the Storage page and uninstall or move games you no longer play. If you are not playing the campaign yet, install just the 88 GB base game first.
If an update stops with a "not enough disk space" error, the patch's temporary files usually have nowhere to go. Make a habit of leaving a few dozen GB free on the drive even after the install.

Frame-rate checklist

  • Update your graphics driver to the latest version to rule out the most basic frame drops.
  • If you fall short of the recommended tier, drop the resolution and graphics preset one notch to give the GPU headroom.
  • Close browsers, launchers, and other background apps before playing to ease the pressure on an 8 GB RAM machine.
  • Keep extra disk space free for clips on top of the 88 GB the install itself needs.
If frames only drop the moment you start recording even on lowered settings, the encoder and its options are the usual suspects — work through the game recording FPS drop guide cause by cause.

How to check your PC specs (dxdiag)

  1. 1Check CPU and RAM with dxdiagPress Win+R, type dxdiag, and run it. The System tab shows your processor model and memory size right away — compare them with the CPU and Memory rows in the table.
  2. 2Confirm your GPU on the Display tabThe Display tab of the same dxdiag window lists your graphics card name and VRAM. Work out whether your card is closer to a GTX 660 or a GTX 1060 5G.
  3. 3Check free storageOpen Settings > System > Storage or This PC in File Explorer to see how much space is left. The install needs 88 GB, so leave more than that if you plan to keep clips.
  4. 4Grade your PC against the tableMatch the three results against the table: below minimum, between minimum and recommended, or above recommended. Above recommended with a hardware encoder means you can aim for recording as well.
Actual Delta Force gameplay — a firefight inside the reactor assembly hall
Official Delta Force screenshot · © Team Jade / TiMi Studio Group

If recording is part of the plan, meet DOR

DOR is a free clip app for Windows that detects your game automatically, records the full match, and keeps it in the in-app library.

On supported NVIDIA graphics cards such as the RTX series, it records with NVENC hardware encoding, so the load it puts on the game is low — a recommended-spec PC can usually play Delta Force and record at the same time.

To keep a kill or highlight, open that full-match recording in the browser editor, cut the section you want yourself, and check or share it straight on the dor.gg web app. To cut the GPU cost of recording even further, see how to reduce recording GPU load.

Official sources

Recording that starts when your game does: DOR game recorder →

DOR Clips

Delta Force clips on DOR

More clips

Delta Force videos recorded and posted by DOR users. Tap one to play it on dor.gg.

FAQ

FAQ

How much storage does Delta Force need?

Steam's official listing puts both the minimum and recommended tiers at 88 GB of available space; the free Black Hawk Down campaign DLC needs another 28 GB, so about 116 GB with both. If you plan to keep clips and recordings, set aside extra room on top of that.

Can I play on the minimum spec?

A GTX 660 with 8 GB RAM is the baseline for running the game on low settings. For stable frame rates in large-scale fights, aim for the recommended tier (GTX 1060 5G, 16 GB RAM) or better.

Do I need a stronger PC to record gameplay?

With GPU hardware encoding such as NVENC, the recording load is low and a recommended-tier PC has enough headroom. Older machines limited to CPU encoding will feel a much bigger hit.

Games

Related game guides

Read next

Related articles

Get started with DOR

Just launch the game and DOR records on its own, so you never miss a great play